Showing posts with label Weights and Measures Act. Show all posts
Showing posts with label Weights and Measures Act. Show all posts

Monday, August 4, 2014

Federal Government Want to Make Sure a Pint is a Pint - Maximum Fines of Up to $50,000 for Repeat Short-Pour Offenders Now Federal Law.

"You're entitled to get what you pay for"  - Industry Canada

The Campaign for Real Ale of BC's (CAMRA BC) Fess Up to Serving Sizes (#FUSS) Campaign received some unexpected help August 1st when the Canadian Federal Government launched their "Fairness at the Pumps" Campaign.

Fairness at the Pumps states, "(e)ffective August 1, 2014, the law states that businesses who short sell consumers, on purpose or through carelessness, can face penalties or court-imposed fines of up to $50,000."  

The information on Industry Canada's website, which clearly includes draft beer servings in the campaign, encourages consumers to file a complaint if they suspect they are "not getting what they paid for" and provides instructions as to what information is required to help Measurement Canada investigate and a link to file the complaint electronically, by telephone or by snail mail. They are even using the hashtag #getwhatyoupayfor in tweets, something I would recommend consumers do so Industry Canada can track interest regarding this new law.


instruction on how to file an official complaint if you suspect you have been short-poured

It also appears that CAMRA BC's #FUSS Campaign is finally being acknowledged by the BC Liberal Government who included the following in their last liquor policy update concerning lowering the minimum drink price for serving sizes of over 50 ounces for draft beer and cider:
"Pubs and restaurants serve draught beer and cider in a variety of sizes - generally, 9 oz., 16 oz. or 20 oz. glasses, or by the pitcher (approximately 60 oz.). If unsure, British Columbians are encouraged to ask establishments what their serving sizes are, so they can be sure of the per-ounce price they are paying and be better aware of the amount of alcohol they are consuming.
  • As part of the terms of their licence, B.C.’s licensed establishments must have a drink list available to consumers that outlines their serving sizes.
Until this announcement the BC Liberals have brushed off CAMRA BC's complaints that many pubs and restaurants do not declare their serving sizes and if they do list them, they do so inaccurately. Although they do not  state they are going to enforce the law and put the ball clearly in the court of the consumer to follow up, the Liberals have at least acknowledged publicly to consumers this serving size list requirement exists and also have acknowledged that not knowing how much alcohol you are consuming can impact consumers in a negative way, something CAMRA BC has been pointing out to the LCLB & the Liberals for years.

Now it appears that Industry Canada is ready to go to bat for draft beer consumers in our country but here in BC the only fly in the ointment is that if the LCLB does not enforce strictly the need for posted serving sizes, and a licensee has no listed serving size, then consumers cannot complain they are being short-poured as they will not know what a full-pour measure is.  

For the Measurement Canada to able to investigate a serving size issue, they need to know what that serving size is supposed to be. 

Conveniently, the Liberals left out the information that if a licensee cannot produce a serving size-price list for their alcoholic beverages, you can make a formal complaint to the LCLB at lclb.lclb@gov.bc.ca or by calling 1-866 209-2111 and they are compelled to send a liquor inspector to investigate and enforce the law.

Both levels of government have put the burden of responsibility onto consumers who they are advising to file complaints if draft beer servings are short-pour or misrepresented. If you really want to make sure a pint is a pint and stop this practice of misrepresenting serving sizes and short pouring by some licensees, you need to take action and file an official complaint. 

Both the Canadian Government and BC Provincial Government have opened the door, acknowledged there is an issue and given consumers the information they need to kick in that door for good, but it is up to consumers to ensure they get what they pay for.

If you are short-poured or an establishment does not have a serving size list when you ask for one, try to resolve the issue by talking to the management of the establishment in a polite manner. If you still cannot resolve the issue to your satisfaction, put the government bureaucrats to work and file a complaint.

It be fantastic to be able to say you live in a province where a pint is a pint!

Monday, July 7, 2014

Shit Storm in a Beer Glass

This past weekend there was a shit storm that hit the Vancouver craft beer community.

Draft beer consumers, fed up with their belief that they are systematically being mislead about serving sizes, collided with liquor licensees who pour, in a way they feel is acceptable, the craft beers we so love. This collision had social media buzzing as folks weighed in on the differences of opinion which I will get into below.

I learned something during the course of the discussion that, naively, I had never thought of before; consumers and licensees define draft beer serving sizes differently.

Somewhere along the way it has become somewhat of an industry standard in Vancouver for licensees to use the size of a serving vessel as the serving size they post on serving size/price lists and/or convey verbally to consumers while many, if not most, consumers consider that actual amount of beer that arrives in the glass to be the serving size.

And this fundamental difference of opinion is causing some great unrest in some quarters of the tight-knit Vancouver craft beer community.

What is the difference you ask?

Well, consider if a bar uses 14-oz sleeves for their draft beer and post 14-oz as their serving size.

That glass would have to be filled to the brim, without any head, to achieve the advertised volume and would be so full it would be impossible for a server to carry without spilling all over the place.

No craft beer lover wants their beer served without the appropriate amount of head and no craft beer lover wants to see their favourite brew end up on a serving tray or the floor. And no craft beer licensee wants the spillage that accompanies filling a glass to the brim.

Realistically, that 14-oz sleeve, if poured properly, will arrive with about 12 oz of beer in it. In this example, approximately one/seventh, or  a little over 14%, of the advertised serving is not being delivered to the customer, which for a $7 sleeve works out to $1, before tax, being paid by the consumer for nothing more than foam and air.

If you take into consideration the 15% alcohol tax and a modest 15% tip you are looking at $1.30 vanishing into thin air for each beer you order using the above example.

Measurement Canada, who police this type of thing, told me in an e-mail a few weeks ago,
"Vendors are required by the Weights and Measures Act to deliver, within the applicable limits of error, the quantity of product they are claiming to sell.  This includes individual servings of beer sold in restaurants, pubs, bars, etc." 
The "applicable limits of error" mentioned in the e-mail is 2.5%. That is only 0.5 oz of error allowed for a pint and 0.35 of an ounce for a 14 oz pour.

It seems consumers legally, if they care about such things (and not all do), do have a legitimate beef.

In contrast, licensees, especially in Vancouver, are feeling pressure to do all they can to compete and attract customers in a highly competitive market.

I have been told by more than a few licensees that because using the glass size has become the "industry standard" in Vancouver for serving sizes, they are feeling compelled to advertise the glass capacity as the serving size is, even if they know that full measure is not arriving at the customer's table. They are feeling forced, they tell me, to make the decision to serve the way they are in order to compete with the next bar next door who is doing so. Being ethical and saying you serve 12 oz in a 14-oz glass for the same price as the bar next door who say they serve 14 oz in a 14-oz glass means the possibility of lost customers.

I don't think for the majority of licensees are dishonest and maliciously set out to cheat their customers - they are just doing what everyone else is doing in the Vancouver marketplace. I know some bar and restaurant owners very well; some are my dear friends, welcome in my home any time, honest and well-meaning and I support the Hell out of them and their businesses any time I can.

Unfortunately, the widespread practice, that has been adopted by even the most honest of folks out there, is illegal. It is not acceptable that consumers should be expected to donate money, from 15-20% at times, for goods they do not receive, to businesses so those businesses can compete in an industry that has little margin for error.

And it sucks that we have such a screwed up "industry standard" that forces honest, good-intentioned licensees to have to make this kind of ethical decision just to feel they can compete in the marketplace with unscrupulous types who operate with impunity due to government disinterest and consumer apathy.

Last Saturday a few craft beer consumers, including CAMRA Vancouver president, Adam Chatburn, who does care about getting what he pays for, headed out to a few of Commercial Drive restaurants and bars, armed with a calibrated glass and their cell phones, and proceeded to find out the posted or verbally conveyed serving size for beers, ordered those beers, measured the volume of beer they received, videoed the results and tweeted these videos and the numbers.

They found that most establishments- only Tangent Cafe was commended for their perfect 12-oz pour - served glasses of beer that fell short, well outside the legal margin for error, compared to the serving sizes promised. In one establishment they found a 20% difference between volume promised and volume delivered when the pint they ordered came in a sleeve.

The posting of these results initiated the above mentioned shit storm.

Some applauded, others booed. Some heaped praise on those posting, others called them down and got personal. I am not here to talk about the process, the reactions, the exact results or whether what these consumers did was right or wrong. You can go here to read CAMRA Vancouver President, Adam Chatburn's explanation of what went down, why they did it and what they found out from his perspective.

This whole thing has come to a head because of CAMRA BC's Fess Up to Serving Sizes Campaign (FUSS) which is nothing more than trying to get licensed establishments to accurately provide their draft beer serving sizes then deliver on that promise as required by both federal and provincial law.

That is what FUSS is - nothing more, nothing less.

I know because FUSS was an idea I came up with a little over 2.5 years ago.

I didn't just pull FUSS out of my ass; I came up with the idea when I was in the president of CAMRA Vancouver after receiving a bazillion complaints from members and non-members alike who believed they were getting much smaller measures in their glasses than they were being promised when they ordered. I thought it would be great for Vancouver craft beer consumers to get CAMRA friendly bars and restaurants to provide a list of their draft beer servings sizes, as required by law, and then lead the charge by producing said measures in hopes that craft beer consumers would be satisfied and these establishments would see increased business due to their transparency regarding what they were serving.

Easy, right? A win-win situation.

Well, not so much as this has turned into a mess with legal and consumer expectations conflicting with the need for licensees to compete in a very cut-throat and often dishonest market. There was, in fact, considerable push back from some on the industry side of the craft beer community, although I will say, most of the feedback was positive and in support of the campaign.

So how do we clean up this mess?

The best way would be for all bars to have marked glassware - glasses with plimsol (fill-to-here) lines so that both those serving and those being served could see that the promised volume was in the glass. CAMRA BC proposed this to John Yap during the liquor policy review and suggested it be phased in over two years so glassware could be replaced slowly when needed via attrition. BC used to have these types of glasses - I can remember them in my early days of going to the pub - but they have long since disappeared.

The government are not interested in legislating the requirement for marked glassware and I have been told by licensees that there is a problem with finding marked glassware and that these glasses are expensive.

The simple solution, which isn't perfect, but which could work, is for licensees to buy glassware that is larger than their planned serving size - i.e., a 16-oz sleeve for a 14-oz serving - leaving room for foam and eliminating the need to fill the glass to the brim.

It would mean eye-balling the amount going into the glass but it shouldn't take long for the bartenders of the city to figure out where on the glass they have to be to hit the mark.

Bars and restaurants who did this could then be uber-supported by CAMRA BC, CAMRA Vancouver, who could run campaigns lauding these places for their transparency and ethical choice to serve it right and be 100% honest about what they are serving. CAMRA could also continue to push the provincial government and Measurement Canada to nail places that do not comply with the law. The craft beer consumers and us who write about such things could support these places by tweeting, posting, writing and talking about them and more importantly, frequenting them over those establishments who choose the status quo.

I have heard that one of the bars called out on Saturday has, as a result of the incident, decided to go this route and order 16-oz glassware to properly fit the 14-oz pours they advertise. Good for them. I hope they follow through, I hope they get the recognition they deserve for turning a negative into a positive and I hope consumers and CAMRA BC support the Hell out of them to both reward them and encourage others to follow suit. I know when I find out they have followed through I will be giving them my support.

Something has to give as this issue is not going to go away and CAMRA BC and CAMRA Vancouver are not going to go away. It is a mess, caused by consumers not standing up for their rights for decades and government not giving shit, and it needs to be fixed.

Let's work together as a craft beer community, consumers and businesses together, to find a workable solution instead of pointing fingers at each other. It really sucks that friends are finding themselves on the opposite side of the fence on this issue when all can be on the side of fixing the problem.

I know some of you out there are going to bash me for this post...give er. This is how I see it and I think it is important. I don't like being expected to accept a situation that is fundamentally wrong and I won't.

If you don't care about this, good for you. Carry on paying for foam and air. But remember, that payment for nothing could be going towards your next, already-expensive sleeve.

This, at its core, it what CAMRA BC is all about. CAMRA BC is a consumer advocacy group, not a beer club or a kiss-industry's-ass club.

If you are a member and feel FUSS is misguided and wrong, get involved, get elected and change the course of your society.

Saturday, August 20, 2011

Does Size Matter?

In a rare show of common sense and with an unprecedented sensitivity to consumer wants and desires, the BC Liquor Control and Licensing Branch sent out a memo, dated April 27, 2011, announcing that they had increased the single serving size for draft beer in BC to up to 24 oz (680ml), eliminating the ridiculous conflict that existed between the old serving maximum of 500ml and the Federal Weights and Measures Act which dictated that if a pint of beer was served in Canada, it must measure 20 oz, or 568ml, in direct violation of the old BC serving size standard.

"Concerns have been expressed that the previous serving size rules did not allow for serving a pint of draft beer," the memo noted, so the LCLB, in what must have been a momentary lapse of reason, actually changed one of their arbitrary, nonsensical, antiquated laws and did a solid for the beer consumers of British Columbia. 


The 20 oz pint is now legal in BC
but still hard to find at least where craft
beer is sold
Hallelujah, rejoice, the pints of my youth could now be brought back from near extinction.

Now I know this is not exactly breaking news, but I have decided to chip in my $0.25 about the desire of some to bring the pint back to its proper place of prominence in BC so I figured I should give the BC LCLB props for actually paving the way for the return of the 20 ounce beer. Anyone who knows me knows I waste no time pointing out the LCLB's faults so it is only fair they get their due when it is warranted.

For whatever reasons (read profits for bar & restaurant owners), the "sleeve", which is basically the bottom half of a martini shaker in glass form, has become the glassware of choice for beers in this province over the past 15 years or so. These glasses can hold between 12 and 16 oz, depending on the flare of the glass, thickness to the glass and thickness of the false bottom and if filled to the brim, which they often are not. If memory serves me right and it often doesn't these days,  the sleeve became popular in Victoria about 15 years ago and the plague spread from there. At least that's what we say here in Vancouver. I am fairly certain that whoever the first person was to come up with the idea of serving a beer in a sleeve, if identified, would have been the most hated man in BC, in some circles, until Gordon Campbell came along with the HST.

Now I may have been asleep at the switch, but I cannot remember for the life of me any crusade by the BC LCLB, or anyone else for that matter, save my ex-wife, to eradicate the pint here in BC and shrink beer serving sizes. I worked in several bars and drank in even more and never heard of an establishment serving beers in pint glasses getting on the wrong side of the LCLB. The move to sleeves seemed to me, at the time, to be a cash grab by business owners who shrank their serving sizes by 20% and more, while charging roughly the same price and advertising falsely that they were still serving the full measure. It wasn't until a public uproar about sleeves being passed off as pints that sleeves began to be called sleeves, although you can still find places that try to pass them off as pints. Now it has become the norm and, for the most part, a sleeve is a sleeve, or is it due to the lack of standardization of size for this made up measure.

Since becoming president of CAMRA Vancouver this past May, probably what I have heard most from folks after, "can you change CAMRA into something more than a beer appreciation club," is the request to try to bring back to 20 oz pint here in BC.

It seems there is a segment of the local beer drinking population who dearly miss their friend the 20 oz pint and want the choice of being able to order one when they desire.

A noble cause, to say the least, but one that no one seems to want to lead. Sure, many, like those who come up to me to ask why CAMRA is not dealing with this issue, complain about the problem, but what are they doing to make their voices heard by those who have control to make the changes they so desire - the owners and managers of bars, lounges, clubs, pubs, restaurants.

For me, it is not the size of the beer that matters most. I personally do miss drinking from pint glasses but wonder, in today's craft beer world, if many beers offered are probably better off not served in full 20 oz glasses due to their high alcohol content. Most of the world I have visited and I have covered a fair bit of this planet, do not serve beer in pints. This tradition comes from the UK and Ireland mostly, where traditionally beers have been lower in alcohol, between 3.5-5 % ABV. Here in BC when pint glasses ruled, beer was a standard 5%, with a very few nosing up slightly higher. Now, in craft beer bars and restaurants, many of the beers are 7% and above, with more than a few weighing in at 9% and higher.

Tulip style glass popular with
many Belgian beers both
bottled and draft
As well, like with wines, many beer styles are now being served in specially designed glasses that enhance the tastes and aromas of those particular styles. This is just catching on here in North America, but in places like Belgium it is an essential part of the beer tasting experience.



What I feel is more of an issue than whether I sip my IPA from a 20 oz or a 12 oz glass is that the glass of beer I am paying for is not short poured or falsely represented. If I am paying for a sleeve of X beer, I want a sleeve of X beer, not 90-95% of a sleeve of X beer, especially with the prices we pay for good beer in this city. And I want to know ahead of time how much that sleeve holds. If it is a 12 oz sleeve, I want to know so I can make my decision as to whether the beer is over-priced or not. If an establishment offers "pints" of beer, I expect a full, 20 oz pint of beer, not a 90% full 20 oz pint, or a 17.5 oz pint, which, although it does not exist (no pint measures 17.5 oz in Canada), you see advertised at some establishments or a sleeve.

Now to me, that is something worth fighting for.

In 2008, CAMRA UK launched their Full Pint Campaign, where CAMRA representatives presented a petition, signed by 23,361, addressed to the British Prime Minister, to his residence at 10 Downing Street. The petition, which collected signatures over an 18-month period at CAMRA beer festivals and through an on-line site, urged the Prime Minister, "to take notice of the 23,361 people who have signed this petition calling for an end to short beer measures." It went on to point out that, "(i)t is unlawful for consumers to be short measured when buying petrol and it should be unlawful for consumers to be short measured when buying a pint of beer." 

Yes, it should be illegal. So should false advertising like stating you are selling a pint and serving a sleeve, or taking a mainstream, macro-lager and calling it an IPA.

To me, clear advertising as to what you are ordering is essential. And then it is just as essential for businesses to deliver on their promise and serve the measure they promised to serve. If a bar wants to sell a 12 oz sleeve, then state that and fill those sleeves to the 12 oz mark. At least consumers know ahead of time what they are ordering.

But if size really does matter to enough consumers who feel passionate about the right to have their favourite beer served in a full, 20 oz pint glass then they need to make their voices heard. They need to convince business owners that it is in their best interests to offer 20 oz pints. CAMRA BC, or more locally, CAMRA Vancouver could be the vehicle to help carry this cause forward, but they cannot do it on their own. Campaigns need organizers. Campaigns need supporters. Campaigns need action plans. What campaigns don't need are people criticizing others for not taking action while they sit back and wait for changes to happen.

There needs to be an organized plan of attack on how to convince those who serve the beers to do so in the vessels we wish to drink from, or at least give us that option. Maybe a petition, like the one in the UK, presented to bar and restaurant owners might persuade them to offer up the pint option at their establishment. There is always the option of frequenting only places that serve the 20 oz pints, but I don't see too many craft beer lovers boycotting The Alibi Room, St Augustine's, or the like, to prove a point. I know I won't.


So, if this is an important issue for you out there and you have any ideas of what to do, drop me an email at pres@camravancouver.ca  with your suggestions and let them know how you'd like to help out. Although, for me personally, the size of the glass isn't the major issue, I can certainly understand the desire to see the 20 oz pint glass  make a come back and as president of CAMRA Vancouver, I would be willing to get a campaign going to try to make that happen.

And maybe while we are at it, we can make sure those 20 oz glasses get filled with the full 20 oz of beer promised.